Adding a Primitive Fall Look to Boring Ol’ Candles

Sometimes things that I think are really cute, will sit in my booth for years, and won’t sell. For example, I bought some small candles years ago, that came in awesome faux white enamel tubs and had a real farmhouse look to them. Though they’re old, they still smell awesome and I am not giving up on them! I have since made them over a few times, and I am hoping my new Fall spin on them will help them move off the shelves. Here’s the new country look and the how-to!

DSC_0028

Originally I tried to sell them as is, for like $3 a piece. Good deal, so I thought, but no one wanted them! 😦 Then as Christmas time came around, I packed them up in plastic bags, tied them with homespun, and added a cute rustic tag, for gift giving. I sold a few, but still have about 6 left. Here’s the “before.”

DSC_0001

My first step in making them over was to “primify” them. I put the broiler on and CAREFULLY watched them for about 1 minute while the tops softened up and smoothed out. After years of sitting around, the wax gets little scratches and nicks, so this process makes them look brand new again. I then shook on some ground cinnamon and let them cool. It gives them a rustic, dusty look, and of course smells great too! Please don’t burn your house down doing this. Don’t leave them unattended and please, be careful people!!!

DSC_0002

My first thought was to tie the burlap over the top and tie off with some twine. I guess I was envisioning more of a cheesecloth look, where you could see and smell the candle better. This just looked dumb. LOL. It also covered my cute, newly dusted candle tops that look so perfectly primitive!

DSC_0007

Take two. I used a plate as a guide to trace out circles of burlap that would fold up around the tubs, from the bottom.  This idea would look great on small jar candles (such as those in short, fat mason jars), so don’t worry if you love the look but can’t find these exact candles! Any jar candle would work!

DSC_0010 DSC_0011

Put a ring of hot glue on the bottom of the jar candle and place on burlap. Then, using tiny dabs of hot glue, fold up the edges and create a taco-shell look. This will make it easier to tie on the twine.

DSC_0016 DSC_0017

Tie it around once or twice and add more dabs of hot glue to hold up your burlap. I also trimmed and frayed the edges of my burlap during this part.

DSC_0018

For a little accent, I took a sprig of pip berries I had lying around and pulled off two sprigs for each candle.

DSC_0008

I curled up the ends of the sprigs by wrapping them around a little paint brush handle. Then I tied them on using the excess twine and finished it off with a little bow.

DSC_0022

I think I will throw in a free mason jar tag with each candle since they’d made nice Fall gifts. I got these mason jar tags at Target…8 for $1! I love them!

DSC_0024

They have a cool “scarecrow” feel with the frayed burlap. They’d be nice for any primitive home decor but will be especially nice for Fall time I think.

DSC_0026

My helper Fred takes a little snooze while I clean up. What a bum!

DSC_0027

Like I said, this look would be easy to create on regular jar candles as well. The cinnamon dusting is a super easy way to make something look “prim” too! What are your thoughts on the finished project? Anything you’d do differently? 🙂

Primitive Grubby Jar Candles

After seeing these types of “grubby” jar candles on Pinterest for many years, I finally got around to trying them myself. Though it was a very long process, they came out so cute and perfectly primitive! There are many tutorials out there on grubby jars, but they are all pretty much the same: coffee grounds and white glue. You can do mason jars or any type of jar candle…it’s the perfect accent for any country or rustic home.

DSC_0534 2

I started with this set of 12 small jar candles from Walmart. They cost around $6, so profitability on these should be pretty good.

DSC_0534

I made up a mixture of about 2/3 coffee grounds to 1/3 cinnamon. Both can be bought at the dollar store for this project. I used matte Mod Podge, but now that it’s all said and done, I would probably use regular white glue because it’s a lot cheaper. I ended up using almost this whole jar on 12 little candles.

DSC_0536 2

Paint on the glass jars with glue and roll in your coffee/cinnamon mixture.

DSC_0538

DSC_0539

Set them aside to dry. It takes a good 24 hours for them to dry thoroughly.

DSC_0541 2

Once dry, gently tap them on the counter to get off any loose coffee/cinnamon grounds. Then apply another coat of glue to seal it. Be prepared…this part is messy! Don’t worry if more grounds come off because you can always do a second coat.

DSC_0530

Set aside to dry again. Another 24 hours. Ugh…I hate waiting!

DSC_0533

Here they are after they are dried. With just one coat, most of the surface was covered, but there were still a few spots where the glass showed through. I decided to do a second coating of the coffee/cinnamon. Looking back, I think I would just stick with one coat. They’re eventually going to be embellished with homespun fabric or burlap, which will cover up any thin areas. It’s up to you how many coats you do, based on the look you’re going for.

DSC_0535

Another little tip: before you start, put a small piece of paper towel over the wax of your candle. Through the process, the cinnamon and coffee grounds fell onto the wax, and it doesn’t come off easy. The paper towel will keep the wax clean. I am going to have to wipe them off which is going to be a pain in the butt…lesson learned.

DSC_0537

If you do decide to do a second coat, be prepared for even more of a mess. Repeat the process of painting them with glue, rolling in cinnamon, and finishing off with a finally coat of glue/Mod Podge to seal. Again, you have to wait 24 hours between each step. Don’t forget to touch up the top little rim of the jars.

DSC_0541

Here they are after two coats and some embellishing. I think they came out so cute. I am planning on pricing them at about $3.00 per candle at my co-op.

DSC_0540

Here are the some of the ways I decided to decorate them. A thin burlap strip topped with a vintage button:

DSC_0531

Thin pieces of twine with rusty stars and hearts:

DSC_0532

Plain ol’ twine and homespun fabric, wrapped around and knotted:

DSC_0534

And a thin twine bow:

DSC_0536

Have fun if you decide to give them a whirl. They are super easy, but be prepared for a long, messy process! I’d love to try this again with mason jars and maybe some larger jar candles. Have a great week and I hope be back soon! 😀

Reclaimed Wood Signs

So after many months of cold miserable winter weather and NO motivation whatsoever, I finally got around to doing a little crafty project this weekend. When inspiration strikes, you gotta run with it! The inspiration came from this old, weathered piece of wood that I found in the woods while walking the dogs. It’s chippy blue paint screamed country/primitive signage, so I broke out the foam stamps and went at it!

DSC_0412

First I had Greg cut them into strips. We have a big saw in the basement, but you can easily pick up a little electric hand saw from Lowes or Home Depot for $30 or so, and have it on hand for projects like this.

DSC_0415

I did a couple posts on foam stamps many moons ago, so here’s a little refresher. First, I laid out the letters of the word I wanted to stamp (the word is actually faced down; these stamps have letters on both sides) to get an idea of the spacing. I wanted to make sure the word would fit before I started.

DSC_0417

The most important thing I have learned when using foam stamps is do not ever dip the stamps directly into the paint. If you do, you’ll have way too much paint on the surface of the stamp. The minute you press down, it will overflow out the sides of the stamp and make uneven, messy letters. The best method I have found is to use a small piece of sponge and just dab on the paint onto the surface of the letter. Give it a couple of practice runs if need be. For this project, I used white acrylic paint.

DSC_0416

Go ahead and stamp out your word. Then, once dry, I applied some saw-tooth hangers on the back of each sign. These types of hangers are easy to use because you simply press them into the wood, but I hammered them down in for good measure.

DSC_0421

My last step was to spray them with a clear acrylic coat so the paint would not continue to chip off. The wood was really old and brittle and the paint was a bit loose, so I wanted to seal it in place.

DSC_0422

Here are the finished products, but I need your opinion. Should I add a coat of antiquing gel to tone down those bright white letters down a bit? I wasn’t sure if I should or not. They have kind of a “beachy” feel.

DSC_0428

I added a little star fish because I felt like it went with the cottage theme and filled up the space on the right that was a bit uneven from the space on the left. FYI those star fish are only $1 at AC Moore’s.

DSC_0429

So here they are. They are going over to my booth at the Carriage Place this week. I’ll probably price them around $7-$8 each. With “found” wood, it’s 99% profit, so no need to mark them up with a high price and let them sit in my booth for months!

DSC_0431

Part of my motivation also stemmed from an awesome estate sale that I went to on Saturday. I got tons and tons of great country/primitive themed items, including some nice antiques. This picture only shows a fraction of what I picked up there. It was half off everything so I literally loaded my car! It’s the first really great sale I’ve been to in a while, so this really got me excited! I love “pickin” season!!!

DSC_0424

Earlier in the week, I also got really lucky and picked up this old wooden butter churn……wait for it……off the side of the road!!! It’s amazing what some people throw away. I cleaned it up and now this cool piece will go to the co-op this week with the rest of the stuff from the sale.

DSC_0423

Well, let me know your thoughts on the signs. They are already really “distressed” looking, which is why I’m not sure on adding the antiquing gel. Have a great week and happy crafting!

Simple Winter Snowman Signs

Here are some very simple winter signs that I made using some wood plaques I picked up at the thrift store a while back. They were half off, making them a dollar each! Even if you’re not great at painting free-hand, these snowmen are really easy!

DSC_0001

First I painted the plaques black using a basic craft acrylic paint. They weren’t covered completely with one coat, but that’s okay because the next step is to distress them with sandpaper.

DSC_0003

Just take a small piece of sandpaper and give them a good once-over.

DSC_0008

I speckled some white paint to make the “snow” effect, using some slightly watered-down white paint and a firm paint brush. I just pulled the bristles back and flicked it over top of the plaques. I then free-handed the words and painted big white circles for the snowman heads. You could also use foam stamps or stencils for the words.

DSC_0009

Next, paint big orange noses, little pink circles for the cheeks, and black dots for the eyes and mouths.

DSC_0032

Once dry, I did one coat of sparkle mod podge. It acts as a sealer but also give them a little sparkle. This step is not necessary though if you’re going to be keeping them inside.

DSC_0033

For hanging, I simply used two small nails to tack down a strip of torn homespun.

DSC_0078

Here they are, all finished. You can’t really appreciate the sparkle in this pic, but they look quite festive in person.

DSC_0081

And here’s a pic of them hanging up in my booth along with some of the Christmas crafts I made in the last few posts!

DSC_0097

Hope everyone had a fantastic Thanksgiving!

Winter Jar Scenes

The holiday craft bug has bit me and I just finished up another project; a big batch of winter jar scenes using mason jars and bottle brush trees. I have seen them on Pinterest, so here is my version. 🙂

DSC_0074

I started by gathering some jars. I used some mason jars I had on hand, and found these ones at Target. I also got a few jars of different shapes, at the Goodwill for super cheap.

DSC_0028

The two small jars on the right are salt & pepper shakers I got from Walmart. I love these cause they are like mini snow globes!

DSC_0050

I used various bottle brush trees; all of which I found at A.C. Moore in either the doll house/miniature section, or the seasonal Christmas section. I also found some cute mini gold reindeer, perfect for this project.

DSC_0030

DSC_0034

The ones with the wooden bases were easy to glue in place. I used hot glue and they seem to be holding pretty firm on the glass. Some people who do this project don’t even glue them down. They will simply add their “snow” and then stick the trees down in. I like them glued in place so they don’t keep falling over.

DSC_0035

The ones without wooden bases posed a bit of a challenge. I created a ball of hot glue on the ends to use as a base. Looking back it would have been easier to use some clay or floral foam, but too late now!

DSC_0038

DSC_0040

DSC_0051

I then added the “snow.” I started out using coarse sea salt and when I ran out, I got Epsom salt. They both work great as snow. The Epsom salt had a peppermint smell too, which is perfect for Christmas crafts! 🙂

DSC_0056

I used tweezers to place the small deer in the snow and big tongs for the deeper jars. I must say this part was a challenge. I did not glue the deer in place because they’d be almost completely covered with the snow. I did push them down in pretty good, and because they are light weight, I am hoping they won’t move around too much.

DSC_0045

I picked up this wad of tin garland at the thrift store last year and stashed it away because I knew I could cut them apart and use them to accent winter crafts. I used the snowflakes to tie around the tops of the jars to give them a little extra country Christmas look!

DSC_0054

Here is one of the completed jars with the snowflake tied around the neck of the jar. I love how they came out!

DSC_0060

For the smaller jars, I left out the deer and just did a little tree scene, and accented it with a raffia bow.

DSC_0057

Here are a few more!

DSC_0062

DSC_0064

For these larger jars, I thought I’d make them into candle holders. I put a small glass tea light holder right into the mouth of the jar. You can get these small glass tea light holders at the Dollar Tree.

DSC_0065

DSC_0066

And remember these from last year?? I had some smaller trees left over and decided to use them up on these cute car ornaments! I got the cars last year after Christmas at Walmart. I am selling them for about $5.50-$6 each. Honestly, I will probably break even on the car ornaments, but I don’t care because they were really fun to make and a fun item to sell around the holidays!

DSC_0071

DSC_0072

DSC_0073

I’m selling the winter jar scenes are ranging from $4-$8 at my co-op, so we’ll see how they go. Hope everyone has a Happy Turkey Day! 🙂

Snowman Wine Bottle Toppers

I was out doing some shopping and came across these cute little hat ornaments and “DING”…a light bulb went off and I thought I could use them for snowman hats. Yes, Christmas displays are in full swing at all the big box stores; I got these at Walmart, next to all the tree ornaments. If you can’t find these particular hats, there are other options out there. Look in the ornament section for different types of hats, and check the doll-making section of the craft stores. You can also click here for a link to some hats you could use instead.

DSC_0007

I had these little terra cotta pots in my craft stash of supplies. I think you can get them at any craft store.

DSC_0006

I painted them white using my heavy artists’ while acrylic paint, since I was out of regular white craft paint. Warning: it takes a gazillion coats to cover the terra cotta. You’ll probably have to do 4-5 coats with the regular craft acrylic. Spray painting might have been an easier option.

DSC_0011

Then I painted on some faces. I love making snowman stuff, because the faces are so easy to paint. You can make the noses all different shapes and sizes.

DSC_0013

I then used a hot glue gun to adhere the hats to the top of the snowman pots. At this point, I thought I was done. But they seemed plain, like they were missing something…

DSC_0016

So I decided to add some little homespun fabric scarfs. I just tore little strips and tied them on.

DSC_0018

They fit perfect on top of a wine bottle. They would make fun stocking stuffers or a nice complement to that bottle of wine you’re giving as a Christmas gift.

DSC_0030

DSC_0026

They also make cute little “shelf sitters” and can go anywhere, not just on top of a wine bottle! I think I will try selling them for $3.50-$4.00 a piece at my co-op.

DSC_0024

I had a lot of fun working on this project. It has helped motivate me a bit and I have some other cool little Christmas-themed projects in the works. Hope to share them with you soon!!! 🙂

Easy Country Decor Ideas: Filling Old Jars

Happy Independence Day to all my crafty friends out there! A day off work meant a little time to do some thrifting this morning, and boy did I score some great stuff! It also got the crafty juices flowing and I decided to do a little bit of tinkering with some left over mason jars and jar-filler ideas. I always seem to have an abundance of mason jars from other projects, garage sales, etc. I can never resist buying them if the price is right, because I always seem to find a use for them! 🙂

DSC_0001

Forgive me if you’ve seen similar pictures and content from previous posts – this is just a recap of all the jar filler ideas I’ve done in the past few years! 😀

The first set of jars I filled with glass marbles. They look great as is, but would also look nice with a twine bow or homespun ribbon tie. I like them just plain!

DSC_0009

Where did I get the marbles you ask? You’ll never believe it…

DSC_0003

The dollar store!!! Not the Dollar Tree, but a random dollar store called “Real Deals.” That’s why I say you have to stop at all different kinds of dollar stores whenever you see them, because you just never know what kind of great crafting supplies you’ll find! I love these because they look genuinely vintage, but were a fraction of the price!

DSC_0005

Vintage buttons make for another great jar filler. These two particular jars are for sale in my Etsy shop. Old buttons are so beautiful and interesting to look at, so why not display them as art? 🙂 I also like to use other types of glass jars like this one on the left, which I think is a vintage jam jar. Not sure though, but I love its textured look and weathered tin lid.

DSC_0006

I filled the next set of jars with some “fixins” which I had lying around, waiting to be scented. I decided to put them in the jars unscented and will tie on a small vial of scenting oil to go with them, so people can refresh the scent now and again. I took out the flat metal lid that goes under the screw cap and replaced it with a square of homespun fabric. I think I will do a big batch of these for Fall and tie on a little tag with a crow or pumpkin on it. I buy these rosehips/putka pods in bulk from various suppliers online.

DSC_0008

Here are a few jars I have filled that are already decorating my house. More vintage buttons and clay marbles from a flea market.

DSC_0010

Dang I love those old clay marbles! I think it’s the palette of earth tone colors that gets me. 🙂

DSC_0011

Here’s how I have some jars displayed, just to give you some ideas.

DSC_0016

DSC_0020

Another easy and cheap bowl filler idea are old Christmas tree bulbs! I find them at every freakin garage sale and estate sale I go to, always buried on the big table of Christmas crap that no one wants. Therefore, they are often very cheap! Obviously these would be great sellers at Christmas craft shows. Accents with a little jingle bell or Christmas themed fabric ties would look great too!

DSC_0018

My last idea for today’s post are old keys. I buy lots of skeleton keys where ever I can, and they often include random other types of keys (more like “modern” key shapes and generally more boring/run of the mill keys) which I usually toss to the side. This is the jar I found at the thrift store today and I thought they’d go perfect together. I really like how it looks and think I’ll keep this one. 😛

DSC_0026

Well here they are all together! I am obsessed! I love them all!!!

DSC_0024

Some other ideas that come to mind are:

  • Acorns
  • Cool lookin’ seed pods
  • Potpourri
  • Sea Shells
  • Sea Glass
  • Wax tarts
  • Jacks (the old children’s game)
  • Old pins, brooches, or vintage clip on earrings

What other jar filler ideas can you guys think of? Send me pics of your jar decorations and I’ll post ’em here! Have a great 4th!

 ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

Here is a picture of some mason jar center pieces filled with lovely black & white family photos, created by reader Susie! Here is the link to her full post: http://www.susiewittwer.com/2013/01/mason-jars-family-photos.html. I just love the idea of using vintage papers/photos inside the jars!  😛

mason jars pic 13

Wooden Primitive Country Flags

Hello my crafty friends! So I was out and about garage sale-ing last week, and I found this box of wood pieces for super cheap. My craft mo-jo slowly came back to me as I was flooded with ideas on how to use them. My first thought was little flags, kind of similar to the wood, country-style, flags that people make out of old fence posts. They came out so cute and are going to my booth at The Carriage Place next week. Here’s the “how-to”!

DSC_0003

First I spray painted them red and white and let them dry for a few hours. I then glued the pieces together using Elmer’s Wood Glue and let them dry over night. They are solid as a rock!

DSC_0005

DSC_0006

Then I hand painted on the blue part using some acrylic paint I had on hand.

DSC_0014

I sanded them a bit and then used a gel stain to get a more primitive look. Basically you just squirt it all over and rub it on and then wipe it off with a paper towel. It gives it a more rustic, weathered look. You could also do this with plain brown paint if you can’t find the gel stain.

DSC_0191

I experimented with hand painting stars and did not like the look of them. I got really lucky and found some white metal stars I had stashed away and they worked perfectly. If you don’t have access to the tin/metal stars like these, you could easily stamp them or paint them on. Here are the finished pieces!

DSC_0193

DSC_0194

Finally, the last step was to install some sort of hanger. I went with my trusty saw tooth hangers that you can pick up at any hardware / home improvement store.

DSC_0189

Ok, now I need your help! I also painted these ones below pretty beachy colors. I had planned on doing kind of funky row of houses, where I’d paint little windows and doors on these. It was a great idea in my head, but after starting to paint the windows, it looked kind of dumb. What else could I do with these? I was thinking maybe turn them to the side and do a “beachy” kind of flag? I have a huge pile of them and am drawing a blank. Any suggestions??

DSC_0008

DSC_0009

Before I go I wanted to share some pictures of my booth that I just did a major overhaul on! There really aren’t a lot of hand made crafts in my booth right now; mostly antiques and vintage items. I hope to get some more hand made items in there soon! A lot of my new inventory I found at thrift stores, garage sales, and Craigslist. I found some real treasures and wish I could keep them all! If only I had more room in my house to decorate!!!

10004075_10202713467730147_1155920464579142158_n

10338300_10202713468730172_3286030086338539867_n

10366040_10202713467490141_7791105867570785268_n

10367594_10202713467210134_1030687936214801429_n

10383553_10202713466930127_16461110583337149_n

Hope you have a great day and thanks for stoppin’ by! Happy crafting!

Mini Jar Candle Wedding Favors

After a loooong miserable winter, I think it’s safe to say that Spring has finally sprung! Just as I knew it would, the nicer weather has motivated me to get back into the crafting groove and also do some “pickin” at the local thrift stores. Lately, my big project has been mass producing these country jar candles as wedding favors ~ 120 to be exact! You may remember them from one of my very first posts, and they are still just as fun, easy, and inexpensive to make. They are somewhat time-consuming (when doing a large quantity like this) but each jar only costs $1 at Wally World, making for a very economical set of favors!

DSC_0420

I like to use these particular jar candles because they come with an “Easy Peel” label, which allows you to very easily take off the label for crafting. They also smell really great and come in a variety of colors.

DSC_0421

For mass production, I found its easiest to tear all your homespun strips ahead of time. Mine were about 1″ wide and I just tore them, to get that raggedy primitive look. For those who don’t have fabric on hand, I usually get mine by the yard at Joann Fabrics.

DSC_0423

I then use a glue gun to apply the homespun strips. Just a little dab will do ya!

DSC_0425

DSC_0427

I don’t worry about having perfectly clean seams where the fabric comes together, because I plan on wrapping them with twine which camouflages the spots that were glued.

DSC_0428

I then pre-cut a bunch of pieces of twine and wrapped them around the candles a few times and tied them in little knots on the back. I glued on rusty stars and hearts on the front of each candle using E6000 glue. I do not like to use hot glue for the rusty pieces because I find they very easily pop off – hot glue doesn’t stick well to the rusty tin. It also melts as the candle heats up!

icm_fullxfull.35522141_10nwbx0dglo0owk4ssgg

This person also wanted the candles wrapped and tagged for her special day. I laid out the text in Microsoft Word, and used my regular ink jet printer to print them out on sheets of brown kraft paper (from A.C.Moore’s). I used a tag shaped punch, but you could also just cut them out into squares or tags and hole punch them!

icm_fullxfull.35514438_efrj8swlg80k4kc4g0ko

Here is the finished product! The baggies are actually candy/baking treat bags.  They are a perfect thin cellophane. I these favors will be just perfect with her country themed wedding!

icm_fullxfull.35514436_5deuiu2v0qgwkc4s88co

I have to share my latest thrift store score because I got some AWESOME items! It just goes to show you that you have to stay persistent and keep going back, even if you seem to have no luck.  After many trips finding nothing at all, I got all these great items that, after a little cleaning up, are some real treasures! Some repro enamelware, tea pots, a crock, and a very cool, vintage looking “Bird Watcher” sign! All will go to my booth at the Carriage Place!

DSC_0001

I got this other amazing group of antique medical items off of Craigslist. I can’t even tell you the incredible freakin low price I paid for this lot because you will literally die!!! I plan on keeping some items for my “oddities” collection, and selling the rest via Etsy and my co-op. They are all from a pharmacy in northern NY. All of the funnels, beakers and bottles are glass, and the mortars & pestles are cast iron and brass. Simply amazing.

DSC_0002

Have a GREAT Easter and happy pickin’ & craftin’!

Single Stem Vases

Happy St. Patrick’s Day to all my fellow Irishmen & women! 🙂 Before I get to today’s craft project, I thought I’d share an update on the primitive crate shutter I made. I finally found a little pip berry wreath at my friend June’s antique store, and it was the perfect size to place right in the center of the shutter! Woohoo!

DSC_0455

I used some thin green floral wire to tie it on the shutter, sliding it between the slats of the crate boards, and securing on the back.

DSC_0456

I then used some jute twine, knotted through the pre-existing holes (from where nails held the crate pieces together) to make a hanger.

DSC_0457

It’s heading over to my co-op this week. I am putting $22 on it. It only cost a few bucks to make – the pip berry wreath being the only expense. The rest of the supplies were on hand, and I was able to re-use an old dilapidated crate that may have otherwise gone in the burn pile! 🙂

DSC_0458

Ok, and not for the single stem bottles project. It’s a “dollar craft” because these awesome little bottles are only $1 at Michael’s craft store! The rest of the supplies I had on hand.

DSC_0441

You can accent the bottles with whatever you’d like! I decided to use rusty tin stars, little enamel number plates, and some skeleton keys. You could also use buttons, twine bows, little pip berry sprigs, faux berries or flowers, sea shells, antique broaches…be creative!

DSC_0443

Took a strip of torn homespun fabric and used a hot glue gun to secure it in place.

DSC_0444

Here are the finished bottles! They could be used for general decor or as single stem flower vases! 🙂

DSC_0446

DSC_0452

I am going to price them at $4 each and see how it goes!

DSC_0454

And last but not least, some great thrift store finds! It’s quite a random collection of items, but cool nonetheless! I found a mint condition 1957 Chevy model car, a chunky primitive candle, a beautiful vintage brass and enamel bowl, and an old brass Eiffel Tower bottle opener!

DSC_0439

I also found a colorful enamel pot, a wooden wall decor/candle holder, and another little brass elf dude that I could not resist. Vintage brass seems to sell really well on Etsy and in te co-op.

DSC_0438

The major score of the trip was a bag of vintage brass horse buckles / tack medallions, in a variety of designs and shapes. I thought they were trivets at first, but upon further research I found that they are used to decorate horse tacks and bridles. They are collectible and are oh so cool!!! Some will go to the co-op and some on Etsy!

DSC_0433

DSC_0436

Hope everyone has a fantastic St. Patrick’s Day! Cheers! 🙂

Reusing Old Crates for Primitive Crafts

If you’re like me, you buy a bunch of stuff at garage sales, barn sales, thrift stores, etc. with some “project” in mind…and then it sits in your basement for two years and collects dust. I have a habit of hoarding anything remotely primitive, especially crates and wood items. I pick them up where ever I can, in whatever condition I find them, even ones that are pretty much falling apart. After a massive cleaning of the craft area last summer, I decided to break down some of these old apple crates and use the weathered wood as a base for some craft projects.

DSC_0268

This one had no bottom and was pretty much useless, and was a perfect candidate to be recycled. One crate yields up to 16 strips of wood (or more, with a bottom) that would work for a variety of primitive/country themed projects! I used a screw driver and just worked it under the wood joints to east them apart. Some pieces broke but most came off without a problem. Obviously, the older and more dilapidated the crate, the easier they come apart!

DSC_0269

These pieces have been sitting in a pile in the basement until this past week, when I finally found some motivation! I decided to make the first batch into country signs. I cut off the broken ends with a table saw, resulting in many different lengths. If you have complete pieces, you could leave them as is and go with larger words or sayings! I practiced my lettering on scrap pieces (I kept those scrap ends for just this reason) and pretty much just winged it.

DSC_0420

I free-handed these words using regular craft paints. When I was mixing colors, I used a heavy acrylic white to thicken up the paint a bit. You could also use a stencil or letter stamps if you’re not comfortable free-handing.

DSC_0419

I then used the pre-made holes (already there from where the nails held the crate together) and drilled a small hole in the other corner. Then using black wire, I made little hangers and tied on some fabric & twine accents.

DSC_0433

They are heading to my co-op this week priced at $5 each. Here are some close-ups. For “welcome” and “wine,” I used a paint pen to accent the letters.

DSC_0432

DSC_0431

DSC_0430

DSC_0429

I messed up the accents on this Beach sign and ended coloring in the letters with a blue paint pen. I’m not crazy about the BRIGHT blue, but maybe it will be a nice pop of color for someone’s beach or cottage decor.

DSC_0428

The next project was making a hanger for my collection of enamel dippers. I simply hammered in a few small nails, spaced out evenly down a full-sized piece of the crate wood.

DSC_0522

I used sawtooth hangers on the back.

DSC_0524

Done! That was easy. Then to hang it up I use my trusty toothpaste method that I just have to share. It’s a genius Pinterest life hack that everyone should be aware of! Just dab a small bit of toothpaste on the middle of the hangers…

DSC_0422

Then position it on the wall where you plan to hang it, and press it against the wall. You will then have two small toothpaste dots on your wall indicating exactly where to place your nails. See them there, those little green dots just below the top cabinets?

DSC_0423

Woohoo! I love it! Literally 2 minutes of effort for this project; it doesn’t get any better than that! It fills that blank wall space perfectly and looks pretty cool displaying my dippers! 🙂

DSC_0435

DSC_0434

And lastly, I wanted to make a “shutter” style wall hanging. I laid them out and then cut down the two horizontal pieces to get rid of the overhang. I scuffed up and sanded the sawed off edges to minimize the “freshly cut” look.

DSC_0519

Then I tried nailing them in place but my nails were either too long or not long enough (pieces are fairly thin) so I used a crap load of wood glue along the horizontal pieces. It seems to be pretty solid now that it has dried.

DSC_0521

I haven’t figured out what to do with it just yet. I was thinking of getting something to hold a mason jar on the front to use as a flower holder. Also contemplating a pip berry wreath in the middle, or putting one more horizontal piece laid flat along the bottom as a small shelf. Hmmm…decisions, decisions. I shall post the finished product when I decide what to do with it. 🙂

DSC_0436

Have a great day and please feel free to send me any of YOUR up-cycled crate crafts to list here! Hope everyone is staying warm….thinking SPRING! 🙂

Making a Custom Sign: Trial and Error

Hello my crafty friends! Summer has kept me quite busy, but I have been able to squeeze in some junkin’ and a few little projects. My latest project is a custom sign I made for a co-worker, with the phrase “Endeavor to Persevere”; a quote from an old Clint Eastwood movie. I haven’t made a sign in a long time, so I had a little bit of a rough go. I thought I’d share my trial and error, and a few tips for sign making.

To start out, spray paint your board with your color of choice. I got this pre-cut board at Lowe’s for $3.

DSC_0230

Sand it to your liking. Go heavy on sanding for a more distressed, country look. There’s no way to mess this up, so just sand away.

DSC_0231

For custom signs, I always use foam stamps. I have had a lot of people ask where I get the large foam alphabet stamps from. They are hard to find, and to be honest, I get them where ever I can find them! All of the stamps I have were ordered online after Googling “large alphabet stamps”. I got them from various sources, such as random online craft stores and people selling gently used stamps on Etsy. Craft stores generally do not sell large stamps like these, so your best option is going to be online.

I use artist grade (thicker, more pigmented) acrylic paint, and I’ll tell ya why in a minute.

DSC_0233

Do not dip the stamp into a big glob of paint. It will be WAY too much and will splurge out the sides when you press down on the stamp. To apply paint to the stamp, use a small piece of slight moist sponge to gently dab on the paint. It seems like a pain, but I promise it’s the best way!

DSC_0234

This was my first attempt. I did not like the way it looked. It looked uneven and my spacing was horrible. I do try to space it out ahead of time by marking the board with little pencil dots, but spacing can be hard to perfect.

DSC_0235

Here’s why I like to use spray paint for the board and heavy grade acrylic paint for the letters. Before the acrylic dries, you can actually wipe off the stamped letters completely.  After stamping many crooked letters, I simply wiped them away with a moist paper towel. Then, when I was done, I still did not like the way it looked. I used a wet sponge to wipe off the entire phrase. It came off quickly and easily. I immediately dried the board with a kitchen towel to avoid saturating the wood. It’s definitely nice to know you have this option should you mess up!

DSC_0236

I decided to use a different set of stamps with a clear back. I highly recommend stamps with the clear backing, as it makes it significantly easier to line up your words! You can SEE the spacing and exactly where the letter will land. Again, these are hard to find…I got lucky and found these online at some random craft store.

DSC_0238

I like this wording much better and the spacing is more even after using the clear backed stamps! No need to worry about the excess board on the right. I will saw it off and even it out.

DSC_0239

To clean the foam stamps, run under water and use a sponge (or your fingers) to rub the paint off the surface of the foam letters. Place on a paper towel to dry. This is important, or else the acrylic paint with harden on the stamps and make them difficult to use.

DSC_0237

I cut down the board using a small electric hand saw that I got at Lowe’s ages ago, for small projects just like this. They are inexpensive and great tools to have on hand. I then re-sanded the edge to keep the distressed look even on both sides.

DSC_0242

To finish off the sign, I used a dark brown gel stain to give it a bit of an aged look. I liberally squirt it right on the sign, and then rub it around with a paper towel. Then wipe off the excess. It’s a subtle effect, but it softens the bright white of the lettering. I find gel stains and antiquing mediums in any craft store, next to the craft acrylics in small bottles.

DSC_0243

For the hanger, I always use these easy-to-install metal hangers. They are found in any home improvement store. The little prongs press right into the wood and make for a strong hold.

DSC_0245

Finally, I sprayed it with a clear poly to seal it. Here is the final result. Hope she likes it!

DSC_0225

In junkin’ news, I hit up a barn sale recently and got this incredible stack of old historical photographs. I listed them in my Etsy store and they have already sold!

DSC_0229

I also picked up a small enamel bed pan, a fun brightly colored vintage tin, and a glass flower frog.

DSC_0226

I got this awesome old bowling pin set, complete with a bunch of brightly colored wooden pins and a yellow ball. I LOVE these for country decor. I now have them listed in my Etsy store. 🙂

DSC_0228

Lastly, I got these gems at the Goodwill thrift store recently. The Peter Rabbit coin bank is silver-plated and very heavy. I polished him up and he is now for sale in my Etsy store! I also got a bunch of tin molds that always seem to sell well.

DSC_0225

Can’t wait to give my friend her sign. She plans on hanging it in their cottage up on the lake. Hope everyone has a great week and Happy Crafting!

Dollar Store Spoons Turned Primitive Kitchen Decor

I have done some posts in the past using this same technique on dollar store spoons, but this was the first time I did a large batch and did a variety of colors with the intent to sell them in groups.

DSC_1533

They were easy and fun, but a bit time consuming. I started with a bunch of spoons from various dollar stores, all of which were 4 or 5 to a pack.

DSC_1354

Instead of just sticking with black, I spray painted them in all different colors including this fun beachy blue-green. 🙂

DSC_1357

Here are the exact brands/colors I used just incase anyone was wondering. I would highly recommend NOT using the American Accents Midnight Blue (the navy one) because it took a million coats to get it close to the cap color, and they just did not come out well. After distressing them, parts of the spoon had an “electric blue” look, and not really the Americana blue I was going for.

DSC_1358

Let them dry thoroughly for a good couple days before sanding them. Sanding tacking paint is NOT fun!

DSC_1361

Now time to “distress.” I used sanding block which are easier for all the little nooks and crannies. I would recommend a medium to coarse sanding block for a quicker sanding. All I had on hand was the fine grit, which worked well, just took a little longer. There is no way to mess up sanding, so just go for it! Imperfections don’t matter since you’re going for the primitive look anyway!

DSC_1363

Once they were all sanded, I wanted to grubby them up, for a primitive, country look. I used this antiquing medium (the brand Folk Art) found in the paint section of the craft store. You also could use regular brown paint or stain, as you’re going to be rubbing it on and then rubbing it off again, to stain the exposed wood left from sanding.

DSC_1505

Here’s my solution to keeping my table clean…I use rolled out brown kraft paper, also found at the dollar store, as a work station. It’s quick, easy, disposable! Great for the messy crafter, like me!

DSC_1507

Simply rub a generous amount of antiquing gel all over the spoon, and then wipe off the excess. It will soak down into the unfinished edges left from sanding, to create an old, worn look. Paper towels or old rags work great. I used a soft car drying cloth (also found at the dollar store; can ya tell I love that place?!?!).

DSC_1510

The difference is more noticeable on some colors than others. Obviously the lighter colors are going to show more on the light colors. Here are some examples of the difference – before and after using the antiquing gel.

DSC_1515

DSC_1520

And here is the “set” I plan to sell in my Etsy store. Tan, red, grayish-brown, minty green, yellow, and black. I love the end result and the color combo. Kinda glad the blue didn’t work out!

DSC_1521

There are many ways to display these spoons. Throw them in an old can or mason jar…

DSC_1523

Or add some pip berries, tin stars, or other fun accessories.

DSC_1527

DSC_1529

My friend Lisa over at Booth #555 did an awesome batch of spoons with a similar technique if you’d like to check them out! http://www.booth555.com/2012/11/primitive-kitchen-themed-wooden-spoons.html. Here is an example of Lisa’s kitchen themed spoons!

DSCN7346

If you give these a try, email me a pic and I’ll be sure to post it here! I love seeing different interpretations on the same project! Happy 4th of July and hope everyone has a great weekend! 🙂

Country Mason Jar Center Pieces

I had to share this fun little endeavor I’m working on! I’m honored to be helping a friend with the decor for her upcoming country-themed wedding this Fall. I have been chipping away at favors, and she recently asked me about doing some center pieces. With dark purple as her main color, she asked for something using “mason jars and burlap” and I immediately visualized these!

DSC_1499

So easy, not to mention economical!!! Strips of burlap (cut from a burlap bag), hot-glued onto the mason jar. Then on top, a purple ribbon (Michaels). Finished off with some raffia and/or jute twine. You can find mason jars at craft stores, thrift stores, Walmart, or even the Dollar Tree!

DSC_1501

DSC_1502

She will put 3 gebera daisies in one and a candle in the other! It will look so pretty flickering against the burlap. 🙂 I can think of a billion ways to personalize or customize these. The possibilities are endless.

  • Add a wooden tag or skeleton key
  • Glue on a faux daisy or flower on the front
  • Change up the ribbon color
  • Use homespun fabric or lace instead of burlap
  • Use different colored twine or raffia
  • Add stamped grungy hang tags
  • Add a metal wire around the neck and hang them up
  • So many ideas! Be creative!

One last thing! I wanted to announce that I have finally re-opened my Etsy store and have a made up a special coupon especially for my blog peeps! Upon check out, enter in the following code into the “apply coupon code” section, for 20% off your total order of $10 or more. Enter it exactly as shown; no spaces. 🙂

Screen Shot 2013-06-25 at 12.27.10 PM

I have added a few new things like porcelain knobs, rolls of burlap, metal letter stamps, and more skeleton keys. I also have much more to add in the upcoming weeks, so stay tuned! Thanks and be back soon! 🙂

DSC_1373

DSC_1456

DSC_1474

DSC_1489

DSC_1490

Dry Erase Paint Chip Calendar

Yes I stole paint chips, and no I don’t feel bad about it! We ARE planning on painting our bathroom at some point so I was…umm…getting ideas for that. Hehe. I’ve been wanting to do a paint chip dry erase board for ages and thought it would be handy to have on the counter with all kinds of summer plans starting to pop up!

First I went over to one of my favorite websites http://www.design-seeds.com to get some color palette ideas. I found many I liked and ended up going with an overall muted theme. This is a fun site to get color ideas for all of your projects…

Screen Shot 2013-05-27 at 1.21.18 PM

DSC_1355

This could easily become a “Dollar Store Craft” if you got a frame and dry erase markers at your local dollar store. I actually looked there first and couldn’t find a frame I liked, so I got this one from Wally World. I like the white frame with the white stripes on the paint chips. An 11 x 14 is the perfect size to fit 7 average sized paint chips, side by side.

DSC_1357

Take out mat and lay the paint chips down facing the glass. I put a small piece of tape on the backs to hold them together, so minimize shifting under the glass.

DSC_1368

I cut a small strip of burlap for the top where I will write the month. You could use anything here – plain paper or a fun scrapbooking paper would work great too.

DSC_1369

The white lines aren’t perfectly straight, but oh well. I’m too lazy to take it apart and line them up. 🙂

DSC_1371

Here she is, all finished! I am looking for the perfect place to hang it. A paper towel or napkin wipes the dry erase marker right off. I will likely use this to organize dinner ideas for the week too.

DSC_1374

The burlap strip I used along the top of the calendar was left over from a bunch of burlap I bought to cover one of my walls at the co-op. The wall was gross and covered in scoffs and nail holes, and I just don’t have time to paint it right now. I opted for an easier and cuter option…covering it in a giant sheet burlap! I bought 8 yards at Joann’s and hung it up using a stapler (I was going to use a staple gun but couldn’t find one, but a normal stapler worked fine on the soft drywall). I then nailed up some grapevine swags along the top to sort of distract from the uneven edges and also give it a country look. I love the results.

IMG_20130522_203823_150

I did a major over-haul on my booth and moved stuff around to give it a fresh look. I also brought in a bunch of new pieces. Here are some updated pics. 🙂

IMG_20130522_204032_993

IMG_20130522_204012_810

IMG_20130522_203933_868

IMG_20130522_203951_789

IMG_20130522_203904_801

IMG_20130522_203846_866

IMG_20130522_203832_691

Happy Memorial Day and thank you to all those who have served and continue to serve! You are all true HEROES and we thank you!

Previous Older Entries Next Newer Entries