Reversible Scarecrow & Snowman

I’m back! After a long crafting hiatus I decided to make something in honor of my favorite season approaching; also a project requested by a friend 🙂 . I haven’t had a lot of time or motivation over the last year so I do apologize for my lack of posts. It feels great to be back at it again. This is a popular one on Pinterest and I’m sure you’ve seen many variations of it. Here’s my take and the how-to!

First I bought the large wood piece already cut to this size at Lowe’s, and had the hat-brim pieces in my stock pile of wood. You can use any size for the brim depending on the look you’re going for; I opted for a chunky, large hat. I spray painted both sides of the board and the brims first, then nailed the brims down on either side so they mirror each other.

Here he is all painted, but I don’t like that real crisp, shiny look…

I like a little bit of a worn look so I did some sanding on the edges. I love these little sanding squares, and when they get all nasty and used up, I wrap a new piece of sand paper around it. Go for a large grit to work faster.

If I could find my frickin palm sander I probably would have done more overall sanding for a more rustic look, but since I was hand sanding and my arm was tired, I just got the edges.

Now it’s time for his face(s)! I perused Pinterest and got some ideas of the faces I like and don’t like, and decided on these. I like the simple eyes, the dotted mouth for the snowman, and the cross-hatched mouth for the scarecrow. Also, I HAD to have the candy corn nose!

For his rosy cheeks I used a little round foam brush. You could use any sponge, or just paint pink circles.

Incase you were wondering I used a black paint pen for the crisp lines, a yellow and orange paint pen for the noses, and white/red acrylic for the white accents and pink cheeks. Any ol’ acrylic paint would work, but I like the paint pens because they allow you to work with more precision, especially when outlining.

Now time for the hat accents. To start, I wrapped a piece of burlap ribbon all the way around and tied it in a bow on the scarecrow side. For the snowman I decided on some pip berries and a rusty star. Everything was secured with a hot glue gun.

For the scarecrow, some raffia and a large wooden button found at Michael’s. Both sides also got a little bow of homespun fabric for some color.

I also added “scarfs” by just ripping some strips of fabric and hot-gluing them in place, criss-crossing a bit.

I’m pretty happy with him overall, my only complaint being the hat seems a bit large for the face. Maybe next time I’ll use a skinnier brim.

Thanks to everyone for checking in and commenting over the last year. I hope to be back again soon with some new ideas! Hope everyone is enjoying the summer!!!!!!!!

Witch Hats

I’ve been feeling particularly Halloweenie lately, given all the Fall goodness that is out in the craft stores. I picked up these paper mache witch hats for $1.oo each at Michael’s and, with a little spray paint and hot glue, converted them into primitive style witch hat decorations. I think they came out pretty cute!

DSC_0115

Here’s the blank canvas.

DSC_0100

First, I spray painted them black. All I had was glossy paint on hand. I usually like to use a matte finish for projects like this. After it dried I sanded it, to make it look a little worn and prim.

DSC_0102

Next, I mixed up some orange acrylic paint with water, to make a really thin orange paint, which works best for splattering. I then used the messy, yet effective “splatter technique,” which is using your fingers to pull back the bristles of the brush and let the paint splatter paint over your surface.

DSC_0101

After it dried like this, I sprayed it with a satin clear coat, mainly to disguise the half glossy/half sanded look. Next time, I’d probably used a matte black paint so that it doesn’t look so funky after sanding.

DSC_0103

While that dried, I made some little tags to decorate the hats with.

DSC_0105

I trimmed the tags to make them a bit smaller and stamped out the words “The witch is in.”

DSC_0108

Next, use some homespun around the base of the hat. I hot glued it in place like this.

DSC_0109

Then I tied some raffia around the base of the hat and also hot glued it down in a few places, but also leaving it loose and flowing.

DSC_0110

I finished them off with some large vintage buttons that I tied on with the tags. I also put a dab of hot glue under them as well, for extra hold.

DSC_0117

DSC_0120

Here they are all done. I am really pleased with them. They are heading over to my co-op today and I am thinking $14 each. I’ve never made anything like this before so not sure how they will sell. We’ll see!

DSC_0118

Happy Fall to all my craft friends out there!

A New Batch of Silicone Dipped Bulbs & Country Night Lights

It’s been a few years since I’ve made these country night lights with silicone dipped bulbs. In case you haven’t seen my old post on how to make them, here is a refresher! They are cheap to make and great items to sell at craft shows, or for your booth at a craft shop or co-op. For some reason they make me think of Fall, and I love to make them this time of year!

DSC_0130

First, get your night lights at the dollar store. I got these at The Dollar Tree. The bases come in all different colors. I tend to do mostly black and white, but this time I threw in a few blue and aqua ones.

DSC_0100

DSC_0105

Don’t mind my ugly carpet background…was crafting in the basement last night. Along with the night lights, I picked up these packages of extra bulbs. I like to make extra bulbs and sell them as replacements.

DSC_0114

For the bulbs to cure, you need to hang them immediately after dipping. I ran a piece of twine between two shelves and used clothespins to hold them in place.

DSC_0107

Your supplies for the bulbs consist of silicone, a little cup for dipping, cinnamon (optional) and a disposable stick to mix with. I add the cinnamon for a warm, primitive look. You can leave the silicone plain too. I use the basic Walmart brand of silicone. Some brands will work better than others – it’s all trial and error. I’ve had the best luck with this stuff. It seems to be just the right consistency.

DSC_0113

You also need one of these gun thingys, to squirt out the silicone. We happened to have one but they are available next to the silicone in Walmart.

DSC_0115

I ended up tossing my flimsy plastic cup and used a glass cup. It was easier to hold on to while dipping. I find that it works best to fill the cup up completely with the silicone mixture. Take the bulbs and dip them down in and turn them slightly to get the silicone to cover the base of the bulb. Then pull out quickly to create the long “tip”. This can be really challenging and takes some practice.

DSC_0119

You must work quickly because the silicone starts to cure and becomes more difficult to work with. Within 15-20 minutes, the silicone in your cup will probably be stiffer and less pliable. Hang them upside down with your clothespins and let them cure for at least 24 hours.

DSC_0120

When I was done with the bulbs, I worked on the bases. I tied on little strips of homespun fabric, finished with little rusty stars and hearts. For the hearts and stars, I just hot-glued them on. Don’t worry; the night lights to not get warm enough to melt the hot glue.

DSC_0121

Here they are all assembled!

DSC_0123

DSC_0124

I love the warm look you get from the cinnamon. Unfortunately they do not smell like cinnamon though.

DSC_0125

DSC_0132

For a display, I used an old cardboard box and covered the inside with scrapbooking paper. Punch holes through the cardboard with scissors for the little metal part to stick through.

DSC_0134

Don’t get discouraged if you try it and can’t get the bulbs to look right. The brand of the silicone makes a huge difference, and also practice makes perfect. I’ll sell these for probably $4.50 each at the co-op. Hope you have a great Labor Day! 🙂

More Magnets Made From Giant Buttons, Puzzle Pieces, and Birch Discs

After my penny rug magnets, I’m on a magnet kick! I can’t stop gluing magnets to things! Here are some of the pieces I’ve been using to make new magnets. I found these awesome giant wooden buttons at Michael’s for $1 per package. 🙂

DSC_0008

This bag of birch discs set me back only a few bucks at Michael’s.

DSC_0011

I love to pick up vintage wooden puzzles from the thrift store to make magnets out of. They come in all kinds of fun designs and shapes.

DSC_0017

First I decided to stamp the birch discs. For small objects like these, I like to lay the stamp down on it’s back and then press down the wooden piece right where I want it. That way I can see the design on the stamp and can line it up better.

DSC_0012

Next, glue on the magnets. Hot glue does not work well for this project; the bond is weak and the magnets pop right off. I use tacky craft glue for a strong hold.

DSC_0013

Here are the finished birch disc magnets. I love ’em!

DSC_0025

Here are the buttons…

DSC_0024

And the retro puzzle pieces.

DSC_0035

Lastly, I had a few miscellaneous pieces that I decided to make into magnets too. Some rusty stars that I added some twine bows to, and some rustic white shapes that I stamped.

DSC_0020

For some reason, magnets always sell really well. I plan on displaying them on some enamelware pots and pans up on the wall at my co-op. I will price them all between $1-$2. They also make great stocking stuffers come holiday time! What kinds of crafty supplies do you have lying around that you can turn into magnets?!?! 😀

“Penny Rug” Magnets

After a great day perusing my favorite antique/country shop, I was inspired to do a little crafting. I picked up a new penny rug table runner, and it got me thinking about how much I love the colors and patterns of penny rugs. I have never been able to sew, so I thought I’d try my hand at painting them!

DSC_0007

Here is my new runner that was the inspiration. I love this color combo!

DSC_0005

These are the wooden discs I used. They are the same ones I use for my snowman and pumpkin face pins & magnets. You can get them at any craft store.

DSC_0007

Paint them your base color. I used acrylics.

DSC_0014

Then paint in your rings of color! I winged it and painted the circles by hand, but a stencil would have been handy. I’m even thinking of trying it again using foam stamps.

DSC_0015

DSC_0016

The next step seems easy in theory, but was actually quite challenging. I’m talking about the little “stitches.” Here’s my trial and error photo. First I tried drawing them on with a paint pen (not pictured), but I can never get those stupid pens to work right. Then I tried painting them on with a fine tipped paint brush (left). Next, I tried drawing them on with a fine tipped Sharpie marker (middle). Lastly, I used a regular sized Sharpie marker (right). I decided to go with the latter. I like the thicker look of the stitches.

DSC_0018

The Sharpie works great at first, but as you continue to draw, the marker almost seems to run out. I think it’s because it doesn’t work well on the painted surface. You might need a couple Sharpies to make it through.

DSC_0019

After they dried, I glued small magnets on the back. Here they are all finished. I had a few casualties…some came out too messy and/or uneven. It’s going to take some practice I think. Overall I think they’re kinda cool.

DSC_0030

I am definitely going to make more of these after I perfect my technique. I have tons of enamel ware pots and pans hanging on the walls at my co-op, which work great as magnet displays. Go Google Penny Rugs right now and see all the beautiful color combinations out there! It’s so inspiring! 🙂

Adding a Primitive Fall Look to Boring Ol’ Candles

Sometimes things that I think are really cute, will sit in my booth for years, and won’t sell. For example, I bought some small candles years ago, that came in awesome faux white enamel tubs and had a real farmhouse look to them. Though they’re old, they still smell awesome and I am not giving up on them! I have since made them over a few times, and I am hoping my new Fall spin on them will help them move off the shelves. Here’s the new country look and the how-to!

DSC_0028

Originally I tried to sell them as is, for like $3 a piece. Good deal, so I thought, but no one wanted them! 😦 Then as Christmas time came around, I packed them up in plastic bags, tied them with homespun, and added a cute rustic tag, for gift giving. I sold a few, but still have about 6 left. Here’s the “before.”

DSC_0001

My first step in making them over was to “primify” them. I put the broiler on and CAREFULLY watched them for about 1 minute while the tops softened up and smoothed out. After years of sitting around, the wax gets little scratches and nicks, so this process makes them look brand new again. I then shook on some ground cinnamon and let them cool. It gives them a rustic, dusty look, and of course smells great too! Please don’t burn your house down doing this. Don’t leave them unattended and please, be careful people!!!

DSC_0002

My first thought was to tie the burlap over the top and tie off with some twine. I guess I was envisioning more of a cheesecloth look, where you could see and smell the candle better. This just looked dumb. LOL. It also covered my cute, newly dusted candle tops that look so perfectly primitive!

DSC_0007

Take two. I used a plate as a guide to trace out circles of burlap that would fold up around the tubs, from the bottom.  This idea would look great on small jar candles (such as those in short, fat mason jars), so don’t worry if you love the look but can’t find these exact candles! Any jar candle would work!

DSC_0010 DSC_0011

Put a ring of hot glue on the bottom of the jar candle and place on burlap. Then, using tiny dabs of hot glue, fold up the edges and create a taco-shell look. This will make it easier to tie on the twine.

DSC_0016 DSC_0017

Tie it around once or twice and add more dabs of hot glue to hold up your burlap. I also trimmed and frayed the edges of my burlap during this part.

DSC_0018

For a little accent, I took a sprig of pip berries I had lying around and pulled off two sprigs for each candle.

DSC_0008

I curled up the ends of the sprigs by wrapping them around a little paint brush handle. Then I tied them on using the excess twine and finished it off with a little bow.

DSC_0022

I think I will throw in a free mason jar tag with each candle since they’d made nice Fall gifts. I got these mason jar tags at Target…8 for $1! I love them!

DSC_0024

They have a cool “scarecrow” feel with the frayed burlap. They’d be nice for any primitive home decor but will be especially nice for Fall time I think.

DSC_0026

My helper Fred takes a little snooze while I clean up. What a bum!

DSC_0027

Like I said, this look would be easy to create on regular jar candles as well. The cinnamon dusting is a super easy way to make something look “prim” too! What are your thoughts on the finished project? Anything you’d do differently? 🙂

Primitive Grubby Jar Candles

After seeing these types of “grubby” jar candles on Pinterest for many years, I finally got around to trying them myself. Though it was a very long process, they came out so cute and perfectly primitive! There are many tutorials out there on grubby jars, but they are all pretty much the same: coffee grounds and white glue. You can do mason jars or any type of jar candle…it’s the perfect accent for any country or rustic home.

DSC_0534 2

I started with this set of 12 small jar candles from Walmart. They cost around $6, so profitability on these should be pretty good.

DSC_0534

I made up a mixture of about 2/3 coffee grounds to 1/3 cinnamon. Both can be bought at the dollar store for this project. I used matte Mod Podge, but now that it’s all said and done, I would probably use regular white glue because it’s a lot cheaper. I ended up using almost this whole jar on 12 little candles.

DSC_0536 2

Paint on the glass jars with glue and roll in your coffee/cinnamon mixture.

DSC_0538

DSC_0539

Set them aside to dry. It takes a good 24 hours for them to dry thoroughly.

DSC_0541 2

Once dry, gently tap them on the counter to get off any loose coffee/cinnamon grounds. Then apply another coat of glue to seal it. Be prepared…this part is messy! Don’t worry if more grounds come off because you can always do a second coat.

DSC_0530

Set aside to dry again. Another 24 hours. Ugh…I hate waiting!

DSC_0533

Here they are after they are dried. With just one coat, most of the surface was covered, but there were still a few spots where the glass showed through. I decided to do a second coating of the coffee/cinnamon. Looking back, I think I would just stick with one coat. They’re eventually going to be embellished with homespun fabric or burlap, which will cover up any thin areas. It’s up to you how many coats you do, based on the look you’re going for.

DSC_0535

Another little tip: before you start, put a small piece of paper towel over the wax of your candle. Through the process, the cinnamon and coffee grounds fell onto the wax, and it doesn’t come off easy. The paper towel will keep the wax clean. I am going to have to wipe them off which is going to be a pain in the butt…lesson learned.

DSC_0537

If you do decide to do a second coat, be prepared for even more of a mess. Repeat the process of painting them with glue, rolling in cinnamon, and finishing off with a finally coat of glue/Mod Podge to seal. Again, you have to wait 24 hours between each step. Don’t forget to touch up the top little rim of the jars.

DSC_0541

Here they are after two coats and some embellishing. I think they came out so cute. I am planning on pricing them at about $3.00 per candle at my co-op.

DSC_0540

Here are the some of the ways I decided to decorate them. A thin burlap strip topped with a vintage button:

DSC_0531

Thin pieces of twine with rusty stars and hearts:

DSC_0532

Plain ol’ twine and homespun fabric, wrapped around and knotted:

DSC_0534

And a thin twine bow:

DSC_0536

Have fun if you decide to give them a whirl. They are super easy, but be prepared for a long, messy process! I’d love to try this again with mason jars and maybe some larger jar candles. Have a great week and I hope be back soon! 😀

Reclaimed Wood Signs

So after many months of cold miserable winter weather and NO motivation whatsoever, I finally got around to doing a little crafty project this weekend. When inspiration strikes, you gotta run with it! The inspiration came from this old, weathered piece of wood that I found in the woods while walking the dogs. It’s chippy blue paint screamed country/primitive signage, so I broke out the foam stamps and went at it!

DSC_0412

First I had Greg cut them into strips. We have a big saw in the basement, but you can easily pick up a little electric hand saw from Lowes or Home Depot for $30 or so, and have it on hand for projects like this.

DSC_0415

I did a couple posts on foam stamps many moons ago, so here’s a little refresher. First, I laid out the letters of the word I wanted to stamp (the word is actually faced down; these stamps have letters on both sides) to get an idea of the spacing. I wanted to make sure the word would fit before I started.

DSC_0417

The most important thing I have learned when using foam stamps is do not ever dip the stamps directly into the paint. If you do, you’ll have way too much paint on the surface of the stamp. The minute you press down, it will overflow out the sides of the stamp and make uneven, messy letters. The best method I have found is to use a small piece of sponge and just dab on the paint onto the surface of the letter. Give it a couple of practice runs if need be. For this project, I used white acrylic paint.

DSC_0416

Go ahead and stamp out your word. Then, once dry, I applied some saw-tooth hangers on the back of each sign. These types of hangers are easy to use because you simply press them into the wood, but I hammered them down in for good measure.

DSC_0421

My last step was to spray them with a clear acrylic coat so the paint would not continue to chip off. The wood was really old and brittle and the paint was a bit loose, so I wanted to seal it in place.

DSC_0422

Here are the finished products, but I need your opinion. Should I add a coat of antiquing gel to tone down those bright white letters down a bit? I wasn’t sure if I should or not. They have kind of a “beachy” feel.

DSC_0428

I added a little star fish because I felt like it went with the cottage theme and filled up the space on the right that was a bit uneven from the space on the left. FYI those star fish are only $1 at AC Moore’s.

DSC_0429

So here they are. They are going over to my booth at the Carriage Place this week. I’ll probably price them around $7-$8 each. With “found” wood, it’s 99% profit, so no need to mark them up with a high price and let them sit in my booth for months!

DSC_0431

Part of my motivation also stemmed from an awesome estate sale that I went to on Saturday. I got tons and tons of great country/primitive themed items, including some nice antiques. This picture only shows a fraction of what I picked up there. It was half off everything so I literally loaded my car! It’s the first really great sale I’ve been to in a while, so this really got me excited! I love “pickin” season!!!

DSC_0424

Earlier in the week, I also got really lucky and picked up this old wooden butter churn……wait for it……off the side of the road!!! It’s amazing what some people throw away. I cleaned it up and now this cool piece will go to the co-op this week with the rest of the stuff from the sale.

DSC_0423

Well, let me know your thoughts on the signs. They are already really “distressed” looking, which is why I’m not sure on adding the antiquing gel. Have a great week and happy crafting!

Easy Country Decor Ideas: Filling Old Jars

Happy Independence Day to all my crafty friends out there! A day off work meant a little time to do some thrifting this morning, and boy did I score some great stuff! It also got the crafty juices flowing and I decided to do a little bit of tinkering with some left over mason jars and jar-filler ideas. I always seem to have an abundance of mason jars from other projects, garage sales, etc. I can never resist buying them if the price is right, because I always seem to find a use for them! 🙂

DSC_0001

Forgive me if you’ve seen similar pictures and content from previous posts – this is just a recap of all the jar filler ideas I’ve done in the past few years! 😀

The first set of jars I filled with glass marbles. They look great as is, but would also look nice with a twine bow or homespun ribbon tie. I like them just plain!

DSC_0009

Where did I get the marbles you ask? You’ll never believe it…

DSC_0003

The dollar store!!! Not the Dollar Tree, but a random dollar store called “Real Deals.” That’s why I say you have to stop at all different kinds of dollar stores whenever you see them, because you just never know what kind of great crafting supplies you’ll find! I love these because they look genuinely vintage, but were a fraction of the price!

DSC_0005

Vintage buttons make for another great jar filler. These two particular jars are for sale in my Etsy shop. Old buttons are so beautiful and interesting to look at, so why not display them as art? 🙂 I also like to use other types of glass jars like this one on the left, which I think is a vintage jam jar. Not sure though, but I love its textured look and weathered tin lid.

DSC_0006

I filled the next set of jars with some “fixins” which I had lying around, waiting to be scented. I decided to put them in the jars unscented and will tie on a small vial of scenting oil to go with them, so people can refresh the scent now and again. I took out the flat metal lid that goes under the screw cap and replaced it with a square of homespun fabric. I think I will do a big batch of these for Fall and tie on a little tag with a crow or pumpkin on it. I buy these rosehips/putka pods in bulk from various suppliers online.

DSC_0008

Here are a few jars I have filled that are already decorating my house. More vintage buttons and clay marbles from a flea market.

DSC_0010

Dang I love those old clay marbles! I think it’s the palette of earth tone colors that gets me. 🙂

DSC_0011

Here’s how I have some jars displayed, just to give you some ideas.

DSC_0016

DSC_0020

Another easy and cheap bowl filler idea are old Christmas tree bulbs! I find them at every freakin garage sale and estate sale I go to, always buried on the big table of Christmas crap that no one wants. Therefore, they are often very cheap! Obviously these would be great sellers at Christmas craft shows. Accents with a little jingle bell or Christmas themed fabric ties would look great too!

DSC_0018

My last idea for today’s post are old keys. I buy lots of skeleton keys where ever I can, and they often include random other types of keys (more like “modern” key shapes and generally more boring/run of the mill keys) which I usually toss to the side. This is the jar I found at the thrift store today and I thought they’d go perfect together. I really like how it looks and think I’ll keep this one. 😛

DSC_0026

Well here they are all together! I am obsessed! I love them all!!!

DSC_0024

Some other ideas that come to mind are:

  • Acorns
  • Cool lookin’ seed pods
  • Potpourri
  • Sea Shells
  • Sea Glass
  • Wax tarts
  • Jacks (the old children’s game)
  • Old pins, brooches, or vintage clip on earrings

What other jar filler ideas can you guys think of? Send me pics of your jar decorations and I’ll post ’em here! Have a great 4th!

 ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~

Here is a picture of some mason jar center pieces filled with lovely black & white family photos, created by reader Susie! Here is the link to her full post: http://www.susiewittwer.com/2013/01/mason-jars-family-photos.html. I just love the idea of using vintage papers/photos inside the jars!  😛

mason jars pic 13

Wooden Primitive Country Flags

Hello my crafty friends! So I was out and about garage sale-ing last week, and I found this box of wood pieces for super cheap. My craft mo-jo slowly came back to me as I was flooded with ideas on how to use them. My first thought was little flags, kind of similar to the wood, country-style, flags that people make out of old fence posts. They came out so cute and are going to my booth at The Carriage Place next week. Here’s the “how-to”!

DSC_0003

First I spray painted them red and white and let them dry for a few hours. I then glued the pieces together using Elmer’s Wood Glue and let them dry over night. They are solid as a rock!

DSC_0005

DSC_0006

Then I hand painted on the blue part using some acrylic paint I had on hand.

DSC_0014

I sanded them a bit and then used a gel stain to get a more primitive look. Basically you just squirt it all over and rub it on and then wipe it off with a paper towel. It gives it a more rustic, weathered look. You could also do this with plain brown paint if you can’t find the gel stain.

DSC_0191

I experimented with hand painting stars and did not like the look of them. I got really lucky and found some white metal stars I had stashed away and they worked perfectly. If you don’t have access to the tin/metal stars like these, you could easily stamp them or paint them on. Here are the finished pieces!

DSC_0193

DSC_0194

Finally, the last step was to install some sort of hanger. I went with my trusty saw tooth hangers that you can pick up at any hardware / home improvement store.

DSC_0189

Ok, now I need your help! I also painted these ones below pretty beachy colors. I had planned on doing kind of funky row of houses, where I’d paint little windows and doors on these. It was a great idea in my head, but after starting to paint the windows, it looked kind of dumb. What else could I do with these? I was thinking maybe turn them to the side and do a “beachy” kind of flag? I have a huge pile of them and am drawing a blank. Any suggestions??

DSC_0008

DSC_0009

Before I go I wanted to share some pictures of my booth that I just did a major overhaul on! There really aren’t a lot of hand made crafts in my booth right now; mostly antiques and vintage items. I hope to get some more hand made items in there soon! A lot of my new inventory I found at thrift stores, garage sales, and Craigslist. I found some real treasures and wish I could keep them all! If only I had more room in my house to decorate!!!

10004075_10202713467730147_1155920464579142158_n

10338300_10202713468730172_3286030086338539867_n

10366040_10202713467490141_7791105867570785268_n

10367594_10202713467210134_1030687936214801429_n

10383553_10202713466930127_16461110583337149_n

Hope you have a great day and thanks for stoppin’ by! Happy crafting!

Mini Jar Candle Wedding Favors

After a loooong miserable winter, I think it’s safe to say that Spring has finally sprung! Just as I knew it would, the nicer weather has motivated me to get back into the crafting groove and also do some “pickin” at the local thrift stores. Lately, my big project has been mass producing these country jar candles as wedding favors ~ 120 to be exact! You may remember them from one of my very first posts, and they are still just as fun, easy, and inexpensive to make. They are somewhat time-consuming (when doing a large quantity like this) but each jar only costs $1 at Wally World, making for a very economical set of favors!

DSC_0420

I like to use these particular jar candles because they come with an “Easy Peel” label, which allows you to very easily take off the label for crafting. They also smell really great and come in a variety of colors.

DSC_0421

For mass production, I found its easiest to tear all your homespun strips ahead of time. Mine were about 1″ wide and I just tore them, to get that raggedy primitive look. For those who don’t have fabric on hand, I usually get mine by the yard at Joann Fabrics.

DSC_0423

I then use a glue gun to apply the homespun strips. Just a little dab will do ya!

DSC_0425

DSC_0427

I don’t worry about having perfectly clean seams where the fabric comes together, because I plan on wrapping them with twine which camouflages the spots that were glued.

DSC_0428

I then pre-cut a bunch of pieces of twine and wrapped them around the candles a few times and tied them in little knots on the back. I glued on rusty stars and hearts on the front of each candle using E6000 glue. I do not like to use hot glue for the rusty pieces because I find they very easily pop off – hot glue doesn’t stick well to the rusty tin. It also melts as the candle heats up!

icm_fullxfull.35522141_10nwbx0dglo0owk4ssgg

This person also wanted the candles wrapped and tagged for her special day. I laid out the text in Microsoft Word, and used my regular ink jet printer to print them out on sheets of brown kraft paper (from A.C.Moore’s). I used a tag shaped punch, but you could also just cut them out into squares or tags and hole punch them!

icm_fullxfull.35514438_efrj8swlg80k4kc4g0ko

Here is the finished product! The baggies are actually candy/baking treat bags.  They are a perfect thin cellophane. I these favors will be just perfect with her country themed wedding!

icm_fullxfull.35514436_5deuiu2v0qgwkc4s88co

I have to share my latest thrift store score because I got some AWESOME items! It just goes to show you that you have to stay persistent and keep going back, even if you seem to have no luck.  After many trips finding nothing at all, I got all these great items that, after a little cleaning up, are some real treasures! Some repro enamelware, tea pots, a crock, and a very cool, vintage looking “Bird Watcher” sign! All will go to my booth at the Carriage Place!

DSC_0001

I got this other amazing group of antique medical items off of Craigslist. I can’t even tell you the incredible freakin low price I paid for this lot because you will literally die!!! I plan on keeping some items for my “oddities” collection, and selling the rest via Etsy and my co-op. They are all from a pharmacy in northern NY. All of the funnels, beakers and bottles are glass, and the mortars & pestles are cast iron and brass. Simply amazing.

DSC_0002

Have a GREAT Easter and happy pickin’ & craftin’!

Single Stem Vases

Happy St. Patrick’s Day to all my fellow Irishmen & women! 🙂 Before I get to today’s craft project, I thought I’d share an update on the primitive crate shutter I made. I finally found a little pip berry wreath at my friend June’s antique store, and it was the perfect size to place right in the center of the shutter! Woohoo!

DSC_0455

I used some thin green floral wire to tie it on the shutter, sliding it between the slats of the crate boards, and securing on the back.

DSC_0456

I then used some jute twine, knotted through the pre-existing holes (from where nails held the crate pieces together) to make a hanger.

DSC_0457

It’s heading over to my co-op this week. I am putting $22 on it. It only cost a few bucks to make – the pip berry wreath being the only expense. The rest of the supplies were on hand, and I was able to re-use an old dilapidated crate that may have otherwise gone in the burn pile! 🙂

DSC_0458

Ok, and not for the single stem bottles project. It’s a “dollar craft” because these awesome little bottles are only $1 at Michael’s craft store! The rest of the supplies I had on hand.

DSC_0441

You can accent the bottles with whatever you’d like! I decided to use rusty tin stars, little enamel number plates, and some skeleton keys. You could also use buttons, twine bows, little pip berry sprigs, faux berries or flowers, sea shells, antique broaches…be creative!

DSC_0443

Took a strip of torn homespun fabric and used a hot glue gun to secure it in place.

DSC_0444

Here are the finished bottles! They could be used for general decor or as single stem flower vases! 🙂

DSC_0446

DSC_0452

I am going to price them at $4 each and see how it goes!

DSC_0454

And last but not least, some great thrift store finds! It’s quite a random collection of items, but cool nonetheless! I found a mint condition 1957 Chevy model car, a chunky primitive candle, a beautiful vintage brass and enamel bowl, and an old brass Eiffel Tower bottle opener!

DSC_0439

I also found a colorful enamel pot, a wooden wall decor/candle holder, and another little brass elf dude that I could not resist. Vintage brass seems to sell really well on Etsy and in te co-op.

DSC_0438

The major score of the trip was a bag of vintage brass horse buckles / tack medallions, in a variety of designs and shapes. I thought they were trivets at first, but upon further research I found that they are used to decorate horse tacks and bridles. They are collectible and are oh so cool!!! Some will go to the co-op and some on Etsy!

DSC_0433

DSC_0436

Hope everyone has a fantastic St. Patrick’s Day! Cheers! 🙂

Reusing Old Crates for Primitive Crafts

If you’re like me, you buy a bunch of stuff at garage sales, barn sales, thrift stores, etc. with some “project” in mind…and then it sits in your basement for two years and collects dust. I have a habit of hoarding anything remotely primitive, especially crates and wood items. I pick them up where ever I can, in whatever condition I find them, even ones that are pretty much falling apart. After a massive cleaning of the craft area last summer, I decided to break down some of these old apple crates and use the weathered wood as a base for some craft projects.

DSC_0268

This one had no bottom and was pretty much useless, and was a perfect candidate to be recycled. One crate yields up to 16 strips of wood (or more, with a bottom) that would work for a variety of primitive/country themed projects! I used a screw driver and just worked it under the wood joints to east them apart. Some pieces broke but most came off without a problem. Obviously, the older and more dilapidated the crate, the easier they come apart!

DSC_0269

These pieces have been sitting in a pile in the basement until this past week, when I finally found some motivation! I decided to make the first batch into country signs. I cut off the broken ends with a table saw, resulting in many different lengths. If you have complete pieces, you could leave them as is and go with larger words or sayings! I practiced my lettering on scrap pieces (I kept those scrap ends for just this reason) and pretty much just winged it.

DSC_0420

I free-handed these words using regular craft paints. When I was mixing colors, I used a heavy acrylic white to thicken up the paint a bit. You could also use a stencil or letter stamps if you’re not comfortable free-handing.

DSC_0419

I then used the pre-made holes (already there from where the nails held the crate together) and drilled a small hole in the other corner. Then using black wire, I made little hangers and tied on some fabric & twine accents.

DSC_0433

They are heading to my co-op this week priced at $5 each. Here are some close-ups. For “welcome” and “wine,” I used a paint pen to accent the letters.

DSC_0432

DSC_0431

DSC_0430

DSC_0429

I messed up the accents on this Beach sign and ended coloring in the letters with a blue paint pen. I’m not crazy about the BRIGHT blue, but maybe it will be a nice pop of color for someone’s beach or cottage decor.

DSC_0428

The next project was making a hanger for my collection of enamel dippers. I simply hammered in a few small nails, spaced out evenly down a full-sized piece of the crate wood.

DSC_0522

I used sawtooth hangers on the back.

DSC_0524

Done! That was easy. Then to hang it up I use my trusty toothpaste method that I just have to share. It’s a genius Pinterest life hack that everyone should be aware of! Just dab a small bit of toothpaste on the middle of the hangers…

DSC_0422

Then position it on the wall where you plan to hang it, and press it against the wall. You will then have two small toothpaste dots on your wall indicating exactly where to place your nails. See them there, those little green dots just below the top cabinets?

DSC_0423

Woohoo! I love it! Literally 2 minutes of effort for this project; it doesn’t get any better than that! It fills that blank wall space perfectly and looks pretty cool displaying my dippers! 🙂

DSC_0435

DSC_0434

And lastly, I wanted to make a “shutter” style wall hanging. I laid them out and then cut down the two horizontal pieces to get rid of the overhang. I scuffed up and sanded the sawed off edges to minimize the “freshly cut” look.

DSC_0519

Then I tried nailing them in place but my nails were either too long or not long enough (pieces are fairly thin) so I used a crap load of wood glue along the horizontal pieces. It seems to be pretty solid now that it has dried.

DSC_0521

I haven’t figured out what to do with it just yet. I was thinking of getting something to hold a mason jar on the front to use as a flower holder. Also contemplating a pip berry wreath in the middle, or putting one more horizontal piece laid flat along the bottom as a small shelf. Hmmm…decisions, decisions. I shall post the finished product when I decide what to do with it. 🙂

DSC_0436

Have a great day and please feel free to send me any of YOUR up-cycled crate crafts to list here! Hope everyone is staying warm….thinking SPRING! 🙂

Making a Custom Sign: Trial and Error

Hello my crafty friends! Summer has kept me quite busy, but I have been able to squeeze in some junkin’ and a few little projects. My latest project is a custom sign I made for a co-worker, with the phrase “Endeavor to Persevere”; a quote from an old Clint Eastwood movie. I haven’t made a sign in a long time, so I had a little bit of a rough go. I thought I’d share my trial and error, and a few tips for sign making.

To start out, spray paint your board with your color of choice. I got this pre-cut board at Lowe’s for $3.

DSC_0230

Sand it to your liking. Go heavy on sanding for a more distressed, country look. There’s no way to mess this up, so just sand away.

DSC_0231

For custom signs, I always use foam stamps. I have had a lot of people ask where I get the large foam alphabet stamps from. They are hard to find, and to be honest, I get them where ever I can find them! All of the stamps I have were ordered online after Googling “large alphabet stamps”. I got them from various sources, such as random online craft stores and people selling gently used stamps on Etsy. Craft stores generally do not sell large stamps like these, so your best option is going to be online.

I use artist grade (thicker, more pigmented) acrylic paint, and I’ll tell ya why in a minute.

DSC_0233

Do not dip the stamp into a big glob of paint. It will be WAY too much and will splurge out the sides when you press down on the stamp. To apply paint to the stamp, use a small piece of slight moist sponge to gently dab on the paint. It seems like a pain, but I promise it’s the best way!

DSC_0234

This was my first attempt. I did not like the way it looked. It looked uneven and my spacing was horrible. I do try to space it out ahead of time by marking the board with little pencil dots, but spacing can be hard to perfect.

DSC_0235

Here’s why I like to use spray paint for the board and heavy grade acrylic paint for the letters. Before the acrylic dries, you can actually wipe off the stamped letters completely.  After stamping many crooked letters, I simply wiped them away with a moist paper towel. Then, when I was done, I still did not like the way it looked. I used a wet sponge to wipe off the entire phrase. It came off quickly and easily. I immediately dried the board with a kitchen towel to avoid saturating the wood. It’s definitely nice to know you have this option should you mess up!

DSC_0236

I decided to use a different set of stamps with a clear back. I highly recommend stamps with the clear backing, as it makes it significantly easier to line up your words! You can SEE the spacing and exactly where the letter will land. Again, these are hard to find…I got lucky and found these online at some random craft store.

DSC_0238

I like this wording much better and the spacing is more even after using the clear backed stamps! No need to worry about the excess board on the right. I will saw it off and even it out.

DSC_0239

To clean the foam stamps, run under water and use a sponge (or your fingers) to rub the paint off the surface of the foam letters. Place on a paper towel to dry. This is important, or else the acrylic paint with harden on the stamps and make them difficult to use.

DSC_0237

I cut down the board using a small electric hand saw that I got at Lowe’s ages ago, for small projects just like this. They are inexpensive and great tools to have on hand. I then re-sanded the edge to keep the distressed look even on both sides.

DSC_0242

To finish off the sign, I used a dark brown gel stain to give it a bit of an aged look. I liberally squirt it right on the sign, and then rub it around with a paper towel. Then wipe off the excess. It’s a subtle effect, but it softens the bright white of the lettering. I find gel stains and antiquing mediums in any craft store, next to the craft acrylics in small bottles.

DSC_0243

For the hanger, I always use these easy-to-install metal hangers. They are found in any home improvement store. The little prongs press right into the wood and make for a strong hold.

DSC_0245

Finally, I sprayed it with a clear poly to seal it. Here is the final result. Hope she likes it!

DSC_0225

In junkin’ news, I hit up a barn sale recently and got this incredible stack of old historical photographs. I listed them in my Etsy store and they have already sold!

DSC_0229

I also picked up a small enamel bed pan, a fun brightly colored vintage tin, and a glass flower frog.

DSC_0226

I got this awesome old bowling pin set, complete with a bunch of brightly colored wooden pins and a yellow ball. I LOVE these for country decor. I now have them listed in my Etsy store. 🙂

DSC_0228

Lastly, I got these gems at the Goodwill thrift store recently. The Peter Rabbit coin bank is silver-plated and very heavy. I polished him up and he is now for sale in my Etsy store! I also got a bunch of tin molds that always seem to sell well.

DSC_0225

Can’t wait to give my friend her sign. She plans on hanging it in their cottage up on the lake. Hope everyone has a great week and Happy Crafting!

Dollar Store Spoons Turned Primitive Kitchen Decor

I have done some posts in the past using this same technique on dollar store spoons, but this was the first time I did a large batch and did a variety of colors with the intent to sell them in groups.

DSC_1533

They were easy and fun, but a bit time consuming. I started with a bunch of spoons from various dollar stores, all of which were 4 or 5 to a pack.

DSC_1354

Instead of just sticking with black, I spray painted them in all different colors including this fun beachy blue-green. 🙂

DSC_1357

Here are the exact brands/colors I used just incase anyone was wondering. I would highly recommend NOT using the American Accents Midnight Blue (the navy one) because it took a million coats to get it close to the cap color, and they just did not come out well. After distressing them, parts of the spoon had an “electric blue” look, and not really the Americana blue I was going for.

DSC_1358

Let them dry thoroughly for a good couple days before sanding them. Sanding tacking paint is NOT fun!

DSC_1361

Now time to “distress.” I used sanding block which are easier for all the little nooks and crannies. I would recommend a medium to coarse sanding block for a quicker sanding. All I had on hand was the fine grit, which worked well, just took a little longer. There is no way to mess up sanding, so just go for it! Imperfections don’t matter since you’re going for the primitive look anyway!

DSC_1363

Once they were all sanded, I wanted to grubby them up, for a primitive, country look. I used this antiquing medium (the brand Folk Art) found in the paint section of the craft store. You also could use regular brown paint or stain, as you’re going to be rubbing it on and then rubbing it off again, to stain the exposed wood left from sanding.

DSC_1505

Here’s my solution to keeping my table clean…I use rolled out brown kraft paper, also found at the dollar store, as a work station. It’s quick, easy, disposable! Great for the messy crafter, like me!

DSC_1507

Simply rub a generous amount of antiquing gel all over the spoon, and then wipe off the excess. It will soak down into the unfinished edges left from sanding, to create an old, worn look. Paper towels or old rags work great. I used a soft car drying cloth (also found at the dollar store; can ya tell I love that place?!?!).

DSC_1510

The difference is more noticeable on some colors than others. Obviously the lighter colors are going to show more on the light colors. Here are some examples of the difference – before and after using the antiquing gel.

DSC_1515

DSC_1520

And here is the “set” I plan to sell in my Etsy store. Tan, red, grayish-brown, minty green, yellow, and black. I love the end result and the color combo. Kinda glad the blue didn’t work out!

DSC_1521

There are many ways to display these spoons. Throw them in an old can or mason jar…

DSC_1523

Or add some pip berries, tin stars, or other fun accessories.

DSC_1527

DSC_1529

My friend Lisa over at Booth #555 did an awesome batch of spoons with a similar technique if you’d like to check them out! http://www.booth555.com/2012/11/primitive-kitchen-themed-wooden-spoons.html. Here is an example of Lisa’s kitchen themed spoons!

DSCN7346

If you give these a try, email me a pic and I’ll be sure to post it here! I love seeing different interpretations on the same project! Happy 4th of July and hope everyone has a great weekend! 🙂

Previous Older Entries