Reclaimed Wood Signs

So after many months of cold miserable winter weather and NO motivation whatsoever, I finally got around to doing a little crafty project this weekend. When inspiration strikes, you gotta run with it! The inspiration came from this old, weathered piece of wood that I found in the woods while walking the dogs. It’s chippy blue paint screamed country/primitive signage, so I broke out the foam stamps and went at it!

DSC_0412

First I had Greg cut them into strips. We have a big saw in the basement, but you can easily pick up a little electric hand saw from Lowes or Home Depot for $30 or so, and have it on hand for projects like this.

DSC_0415

I did a couple posts on foam stamps many moons ago, so here’s a little refresher. First, I laid out the letters of the word I wanted to stamp (the word is actually faced down; these stamps have letters on both sides) to get an idea of the spacing. I wanted to make sure the word would fit before I started.

DSC_0417

The most important thing I have learned when using foam stamps is do not ever dip the stamps directly into the paint. If you do, you’ll have way too much paint on the surface of the stamp. The minute you press down, it will overflow out the sides of the stamp and make uneven, messy letters. The best method I have found is to use a small piece of sponge and just dab on the paint onto the surface of the letter. Give it a couple of practice runs if need be. For this project, I used white acrylic paint.

DSC_0416

Go ahead and stamp out your word. Then, once dry, I applied some saw-tooth hangers on the back of each sign. These types of hangers are easy to use because you simply press them into the wood, but I hammered them down in for good measure.

DSC_0421

My last step was to spray them with a clear acrylic coat so the paint would not continue to chip off. The wood was really old and brittle and the paint was a bit loose, so I wanted to seal it in place.

DSC_0422

Here are the finished products, but I need your opinion. Should I add a coat of antiquing gel to tone down those bright white letters down a bit? I wasn’t sure if I should or not. They have kind of a “beachy” feel.

DSC_0428

I added a little star fish because I felt like it went with the cottage theme and filled up the space on the right that was a bit uneven from the space on the left. FYI those star fish are only $1 at AC Moore’s.

DSC_0429

So here they are. They are going over to my booth at the Carriage Place this week. I’ll probably price them around $7-$8 each. With “found” wood, it’s 99% profit, so no need to mark them up with a high price and let them sit in my booth for months!

DSC_0431

Part of my motivation also stemmed from an awesome estate sale that I went to on Saturday. I got tons and tons of great country/primitive themed items, including some nice antiques. This picture only shows a fraction of what I picked up there. It was half off everything so I literally loaded my car! It’s the first really great sale I’ve been to in a while, so this really got me excited! I love “pickin” season!!!

DSC_0424

Earlier in the week, I also got really lucky and picked up this old wooden butter churn……wait for it……off the side of the road!!! It’s amazing what some people throw away. I cleaned it up and now this cool piece will go to the co-op this week with the rest of the stuff from the sale.

DSC_0423

Well, let me know your thoughts on the signs. They are already really “distressed” looking, which is why I’m not sure on adding the antiquing gel. Have a great week and happy crafting!